DATAQ Instruments offers a wide range of DAQ products, from inexpensive USB starter kits to multi-channel instruments that adapt to literally any industrial measurement. Many are available with either a USB or Ethernet interface. To view our Ethernet DAQ product offerings please see our Ethernet DAQ (data acquisition) products. Please note that the term "DAQ (data acquisition)" implies products that connect to a PC to acquire data. If you need an instrument that can operate stand-alone, recording to its own internal memory without a connected PC, see our data logger products.
DI-145 |
DI-145 USB DAQ Starter Kit
- Acquires data directly to a PC
- 4 differential channels
- Fixed ±10-volt FS measurement range per channel
- 240Hz maximum sample rate
- Built-in USB interface
- ONLY $29
|
DI-149 |
DI-149 USB DAQ Starter Kit
- 8 differential channels
- Fixed ±10-volt FS measurement range per channel
- Sample rates of <1 to 8,000 Hz
- Built-in USB interface
|
EL-USB-RT |
EL-USB-RT USB DAQ
- Measures temperature, humidity, and dew point
- Supports real time text, email, and audible alarms via USB connection
- -20 to 70°C (-4 to 158°F), temp measurement range
- ±1.5°C (±3°F) overall temp accuracy
- 0 to 100% RH measurement range
- ±4.5% overall RH accuracy
|
DI-155 |
DI-155 USB DAQ Starter Kit
- 4 fixed differential channels
- ±2.5 to ±50-volt FS measurement range per channel (software selectable)
- 8 software-programmable gain ranges per channel
- Sample rates of <1 to 10,000 Hz
- Built-in USB interface
|
L261 |
L261 High Voltage AC/DC USB DAQ
- Measures a single direct-connected voltage
- Built-in data recording memory or acquire data to a PC
- 0 to 600 VAC/DC measurement range
- AC true rms measurements
- Alarm function
- Built-in USB interface
|
DI-710 |
DI-710 Low Cost, Multi-channel USB DAQ
- Programmable 16 single-ended or 8 differential channels
- Acquires data directly to a PC or to a removable SD memory card
- 4 selectable gain ranges per channel
- Sample rates of <1 to 8,000 Hz
- Built-in USB or Ethernet interface
|
DI-718B
DI-718Bx |
DI 718B and DI-718Bx Multi-purpose USB DAQ
- 8- or 16-channel versions
- Acquires data directly to a PC or to a removable SD memory card
- Supports USB or Ethernet interfaces
- Adapts to any industrial measurement
|
DI-1000TC |
DI-1000TC Multi-channel Thermocouple USB DAQ
- 1- to 240-channel capacity
- 1,000 V isolation per channel
- Daisy-chain multiple units for easy channel expansion
- 1,000-ft for non-localized measurements
- Records in real time to a connected PC
- Supports USB and serial interfaces
|
GL220 |
GL220 Multi-purpose USB DAQ with Built-in Display
- 10-channel capacity
- Supports direct-connected thermocouples for temperature measurements
- Supports direct-connected voltages (20 mV to 50 VFS) for general-purpose measurements
- Supports four alarm outputs
- Built-in, full color WVGA display
- Stand-alone or PC-connected operation
- Built-in data storage memory, expandable with USB thumb drives
- Built-in USB interface
|
GL820 |
GL820 Multi-purpose USB DAQ with Built-in Display
- 20-channel capacity, expandable to 200 channels
- Supports direct-connected thermocouples and RTDs for temperature measurements
- Supports direct-connected voltages (20 mV to 50 VFS) for general-purpose measurements
- Supports four alarm outputs
- Built-in, full color WVGA display
- Stand-alone or PC-connected operation
- Built-in data storage memory, expandable with USB thumb drives
- Built-in USB and Ethernet interfaces
|
DI-720 |
DI-720 Advanced USB DAQ
- Acquires data directly to a PC
- Programmable 32 single-ended or 16 differential channels
- 4 selectable gain ranges per channel
- Supports ±1.25, 2.5, 5, 10-volt FS per channel
- Sample rates of <1 to 200,000 Hz
- Built-in USB or Ethernet interface
- Ethernet interface daisy chains to support synchronous and distributed voltage measurements.
|
DI-722 |
DI-722 Hardened USB DAQ
- Acquires data directly to a PC
- 32 differential channels
- Input protection to 120 vrms per channel
- 4 selectable gain ranges per channel
- Supports ±2.5, 5, 10, 20-volt FS per channel
- Sample rates of <1 to 50,000 Hz
- Built-in USB or Ethernet interface
- Ethernet interface daisy chains to support synchronous and distributed voltage measurements.
|
DI-730 |
DI-730 Extended Range USB DAQ
- Acquires data directly to a PC
- 8 differential channels
- 6 selectable gain ranges per channel
- Supports ±10 mV, 100mV, 1 V, 10 V, 100 V, 1,000 V full scale measurements per channel
- Sample rates of <1 to 150,000 Hz
- Built-in USB or Ethernet interface
- Ethernet interface daisy chains to support synchronous and distributed voltage measurements.
|
MT100 |
MT100 USB DAQ with Built-in Display
- 10-channel capacity, isolated
- Supports direct-connected thermocouples and RTDs for temperature measurements
- Supports direct-connected voltages (20 mV to 50 VFS) for general-purpose measurements
- Supports four alarm outputs
- Built-in, full color WVGA display
- Stand-alone or PC-connected operation
- Built-in data storage memory, expandable with USB thumb drives
- Built-in USB and Ethernet interfaces
|
DI-788 |
DI-788 Expandable, Multi-channel USB DAQ
- Acquires data directly to a PC
- 32 isolated channels
- Expandable to 240 channels
- Sample rates of <1 to 150,000 Hz
- Built-in Ethernet interface
- Ethernet interface daisy chains to multiple instruments to support synchronous and distributed voltage measurements
- A single instrument may be used with an optional USB interface
|
