Menu 
 |
Product Highlights |
With its color monitor and internal memory the GL900 is a self-contained, compact, lightweight, multi-channel data logger with 8 analog measurement channels, each with input-to-output and channel-to-channel isolation. Measurements per channel of 20mV to 500VFS across 14 programmable ranges allow the GL900 to adapt to a wide range of signal types, including thermocouple-based temperatures (K,J,E,T,R,S,B,N,W) and process current (4-20 mA). Up to four pulse channels can count and measure speed using an optional cable, and Humidity measurements are also possible with an optional sensor. The GL900 may be configured to trigger up to four different alarm outputs as a function of measured values.
The GL900 allows data to be recorded to internal high-speed volatile RAM memory (64 MB) at rates as fast as 100,000 Hz. The unit also provides built-in non-volatile memory (256 MB) and accepts external USB flash drives (2 GB maximum file size) for lower speed sampling as fast as 1,000 Hz. The minimum sample rate for all memory configurations is one sample per minute.
The GL900 features built-in USB and Ethernet ports to facilitate data transfer to a connected PC either in real time or from its memory for analysis and archiving. Measurement protocols may also be uploaded from the PC to the instrument.
An optional battery pack allows power-independent operation and failsafe measurement continuity during a power failure.
Measure from 20mV to 500V full scale, as well as process current (4-20mA) and temperature measurements using type J,K,E,T,R,S,B,N, or W thermocouples.
The GL900’s eight analog input channels offer electrical isolation to allow accurate measurements in industrial applications where ground potential differences are often encountered.
Depending upon the destination memory (internal RAM, flash, or external USB flash drive) sample rates as fast as 100,000 Hz are supported.
The GL900 provides discrete input channels that can be used for counting and rotational speed or flow measurement applications. Or program the discrete inputs as simple logic level input channels.
Program the GL900 to trigger its open-collector outputs as a function of analog input signal level judgment, pulse judgment, or logic pattern.
The GL900 may be programmed to calculate average value, peak value, minimum value, and rms. You can also generate calculated channels as a function of arithmetic operations in real time.
The focal point of the GL900 is its built-in color display that allows real time trending, data review, and complete instrument configuration.
Each GL900 channel allows up to four break points to be programmed for accurate scaling into meaningful units like psi, grams, newtons, gallons per minute, liters, etc.
The GL900 allows data capture to be started or stopped based upon a manual keystroke or automatically based upon signal level, an external event, date/time, alarm, duration, or Boolean channel combinations. Analog signal triggers can be programmed based upon level and window tests: above threshold, below threshold, inside window, or outside window.
Power the GL900 from its provided international AC adaptor, from an optional built-in battery pack, or from any 9 to 24 VDC source using an optional cable.
Allows data transfer to the PC either in real time or from the GL900’s memory. Also allows complete configuration of the GL900.
The GL900 includes a Windows application for direct capture, measurement, and monitoring of GL900 data as well as analysis (FFT, X-Y plots, etc). The application can export data to an Excel file for further analysis and report creation. The software includes built-in help for quick reference.
 |
View Prices and Order |
| Part # | Price | Order |
| GL900 Includes calibration certificate traceable to NIST, PC-based software, and AC adaptor. |
$4295 |
Note: We do not accept orders for Graphtec data loggers (GL220, GL820, GL900, and MT100) to shipping or billing addresses outside of North/Central/South America.
Note: The GL900 is NOT compatible with WinDaq or WinDaq/XL Software packages.
| Part # | Price | Order |
| ADAP-5 Safety insulated male BNC to dual 4mm banana jacks. View image. |
$25 | |
| CABL-900 Cable and adapter kit Includes one ADAP-5; one pair of safety-shrouded 39-in (99-cm) test leads (one red, one black); one pair of safety right angle plunger hook clips (one red, one black). View image. |
$50 | |
| B-517-2 Set of 2 Battery Packs Two 7.2V/2200mAh Battery packs Only ONE B-517-2 is required for use with the GL900. |
$270 | |
| B-514 DC Power Cable 2-meter DC power cable, bare tips. |
$60 | |
| B-513 Logic Alarm Cable 2-meter, bare tips. |
$95 | |
| B-530 Humidity Sensor 3-meter with dedicated power connector. |
$470 | |
| B-544 Carrying Case Interior padding and rugged exterior for safe transportation of your data logger. View photo. |
$550 | |
| R250 Resistor Precision 250 Ω resistor, 0.1%. Learn More about 4-20mA current loop data acquisition. |
$0.99 | |
| GLACP Spare AC Power supply Spare AC power supply for GL200A, GL800, and GL900 products |
$41 |
Note: The GL900 is NOT compatible with WinDaq or WinDaq/XL Software packages.
 |
Datasheet and Manual |
 |
Videos and Multimedia |
 |
Guides and Cool Stuff |
 |
Try out our NEW data acquisition and data logger product screener for help choosing the right product for your application |
Also check out these similar products: |
|
 |
GL220 Data Logger Handheld 10-channel data logger with 4.3 inch LCD color display. |
 |
GL820 Data Logger Handheld 20 to 200-channel data logger with 5.7 inch LCD color display. |
 |
MT100 Chart Recorder 10-channel chart recorder with 5.7 inch LCD color display. |
 |
DVTH Data Logger Low-cost Temperature and Humidity Data Logger with Graphical Display |
|
DI-710 Data Logger 16 single-ended or 8 differential analog inputs, 14-bit measurement accuracy, USB or Ethernet interfaces, and stand-alone data logger capability. |
 |
DI-718B Data Logger Features 8 channels designed specifically for DI-8B modules, 14-bit resolution, up to 10 kHz sample throughput rate, and a stand-alone data logger option. |
 |
DI-718Bx Data Logger Features 16 channels designed specifically for DI-8B modules, 14-bit resolution, up to 10 kHz sample throughput rate, and a stand-alone data logger option. |
 |
EasyLog Data Logger Series Low-cost, compact, data loggers. |
 |
EL-USB-RT Low-cost, compact, PC-connected data logger with USB interface. Measures temperature, humidity, and dew point. |
 |
Software |
The GL900 includes a Windows application for direct capture, measurement, and monitoring of GL900 data. In addition to waveform and data value capture and display, the application can export data to an Excel file for further analysis and report creation. The software includes built-in help for quick reference. This software is not available online.
Please note: The GL900 is NOT compatible with WinDaq or WinDaq/XL Software packages.
 |
Articles and Support |
Datasheet (pdf)
Manual (pdf)
Introduction
Channel Configuration
Triggered Storage
Record at Specified Time
Snapshot of Display
Statistics
Set Alarm
GL900 Extended Measurement
Display Engineering Units
APS Software Overview
Generating Reports in Excel
