Menu 
 |
Product Highlights |
With its color monitor and internal memory the GL200A is a compact, lightweight, multi-channel data logger that provides 10 analog measurement channels, in addition to one channel each of discrete logic and pulse inputs. The GL200A also supports one external trigger input and one alarm output. The GL200A is equipped with a 3.5 MB internal flash memory to allow the direct capture of acquired data, and its built-in USB port may be used to connect any standard USB flash drive for incremental capacity. Alternatively, the USB interface may be connected to a PC to allow data upload in real time or from memory, as well as remote configuration and real time data acquisition.
Each GL200A analog channel can measure from 20 mV to 50 VFS across eleven programmable measurement ranges.
Each analog GL200A channel is electrically isolated from all others and from instrument ground to allow accurate and safe measurements in industrial applications where ground potential differences are common.
Use the GL200A to measure humidity with an optional sensor.
Use the GL200A to measure voltages, currents, 4-20 mA process currents, as well as thermocouple-based temperatures.
The GL200A provides one discrete input channel that can be used for counting and rotational speed measurement applications.
The GL200A may be programmed to calculate average value, peak value, minimum value, and rms.
Program the GL200A to trigger its alarm output as a function of analog input signal level judgment, pulse judgment, or logic pattern.
Sample intervals can be programmed to be one of sixteen values ranging from 100 ms to one hour.
The focal point of the GL200A is its 3.5" built-in color display that allows real time trending, data review, and complete instrument configuration.
Each GL200A channel allows up to four break points to be programmed for accurate scaling into meaningful units like psi, grams, newtons, gallons per minute, etc.
Use the GL200A to measure the binary status of any external system.
The GL200A allows data capture to be started or stopped based upon signal level, an external event, date/time, alarm, duration, or Boolean channel combinations. Analog signal triggers can be programmed based upon level and window tests: above threshold, below threshold, inside window, or outside window.
Power the GL200A from its provided international AC adaptor, from an optional built-in battery pack, or from any 9 to 24 VDC source using an optional cable.
Allows data transfer to the PC either in real time or from the GL200A's memory. Also allows complete configuration of the GL200A. Connect any standard USB Flash Drive to the USB port for external memory expansion.
The GL200A includes a Windows application for direct capture, measurement, and monitoring of GL200A data. In addition to waveform and data value capture and display, the application can export data to an Excel file for further analysis and report creation. The software includes built-in help for quick reference.
 |
View Prices and Order |
| Part # | Price | Order |
| GL200A OBSOLETE Compact, lightweight, multi-channel data logger with 10 analog measurement channels, 20mV to 50V Full Scale measurement range, and 3.5 MB internal flash memory. |
N/A | OBSOLETE |
Note: The GL200A is NOT compatible with WinDaq or WinDaq/XL Software packages.
| Part # | Price | Order |
| B-517 Battery Pack 7.2V/2200mAh lithium battery pack. |
$135 | |
| B-514 DC Power Cable 2-meter DC power cable, bare tips. |
$60 | |
| B-530 Humidity Sensor 3-meter with dedicated power connector. |
$470 | |
| B-536 Carrying Case Interior padding and rugged exterior for safe transportation of your data logger. View photo. |
$430 | |
| R250 Resistor Precision 250 Ω resistor, 0.1% |
$0.99 | |
| GLACP Spare AC Power supply Spare AC power supply for GL200A, GL220, GL820, and GL900 products |
$41 |
Note: The GL200A is NOT compatible with WinDaq or WinDaq/XL Software packages.
 |
Datasheet and Manual |
 |
Videos and Multimedia |
 |
Guides and Cool Stuff |
 |
Try out our NEW data acquisition and data logger product screener for help choosing the right product for your application |
Also check out these similar products: |
|
 |
GL820 Data Logger Handheld 20 to 200-channel data logger with 5.7 inch LCD color display. |
 |
GL900 Data Logger Handheld 8-channel data logger with 5.7 inch LCD color display. Measures 20mv to 500V full scale. |
 |
DVTH Data Logger Low-cost Temperature and Humidity Data Logger with Graphical Display |
|
DI-710 Data Logger 16 single-ended or 8 differential analog inputs, 14-bit measurement accuracy, USB or Ethernet interfaces, and stand-alone data logger capability. |
 |
DI-718B Data Logger Features 8 channels designed specifically for DI-8B modules, 14-bit resolution, up to 10 kHz sample throughput rate, and a stand-alone data logger option. |
 |
DI-718Bx Data Logger Features 16 channels designed specifically for DI-8B modules, 14-bit resolution, up to 10 kHz sample throughput rate, and a stand-alone data logger option. |
 |
DI-715B Data Logger Features 8 channels designed specifically for DI-5B modules, 14-bit resolution, up to 10 kHz sample throughput rate, and a stand-alone data logger option. |
 |
EasyLog Data Logger Series Low-cost, compact, data loggers. |
 |
EL-USB-RT Low-cost, compact, PC-connected data logger with USB interface. Measures temperature, humidity, and dew point. |
 |
Software |
The GL200A includes a Windows application for direct capture, measurement, and monitoring of GL200A data. In addition to waveform and data value capture and display, the application can export data to an Excel file for further analysis and report creation. The software includes built-in help for quick reference. This software is not available online.
Please note: The GL200A is NOT compatible with WinDaq or WinDaq/XL Software packages.
 |
Articles and Support |
Datasheet (pdf)
Manual (pdf)
Quick Start Guide (pdf)
Introduction
Channel Configuration
Triggered Storage
Record at Specified Time
Snapshot of Display
Statistics
Set Alarm
