Home
Menu   
Desktop

DI-5B36 Potentiometer Input Modules

0Ω to 10kΩ Input Range
DI-5B Industrial Signal Conditioning Modules

Each DI-5B36 potentiometer input module provides a single channel of potentiometer input which is filtered, isolated, amplified, and converted to a high level analog voltage output. This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without the requirement of external multiplexers.

The DI-5B36 module is designed with a completely isolated computer side circuit that can be floated to ±50V from power common (pin 16). This complete isolation means that no connection is required between I/O common and power common for proper operation of the output switch.

Excitation for the potentiometer is provided from the module by two matched current sources. When using a three-wire potentiometer, this method allows cancellation of the effects of lead resistances. The excitation currents are very small (less than 1.0mA) which minimizes self heating of the potentiometer.

Signal filtering is accomplished with a six-pole filter, which provides 95dB of normal-mode rejection at 60Hz and 90dB of rejection at 50Hz. Two poles of this filter are on the field side of the isolation barrier, and the other four are in the output stage.

After the initial field-side filtering, the input signal is chopped by a proprietary chopper circuit. Isolation is provided by transformer coupling, again using a proprietary technique to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, ±5%.

A special input circuit on the DI-5B36 provides protection against accidental connection of power-line voltages up to 240VAC.

Want to port your data into a spreadsheet or a database?

Check out our add-on software:

Port Data Acquired with your DI-710 Data Logger to Excel

WinDaqXL This WinDaq Software data acquisition add-on allows you to port acquired data directly into a Microsoft Excel Spreadsheet in real time. 60-day Trial Version available.

Also check out the DATAQ Developer Network to learn how to use our ActiveX controls with Microsoft Excel and Access.

Port Data Acquired with your DI-710 Data Logger to MySQL

WinDaq/MySQL This free WinDaq Software data acquisition add-on allows you to port acquired data directly into a MySQL database in real time.

Part # Price Order
DI-5B36-01
0Ω to 100Ω input range.
$205
Quantity: 
DI-5B36-02
0Ω to 500Ω input range.
$205
Quantity: 
DI-5B36-03
0Ω to 1kΩ input range.
$205
Quantity: 
DI-5B36-04
0Ω to 10kΩ input range.
$205
Quantity: 
Accessories
Backplanes and Power Supplies.
N/A Go to Accessories

Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country.
DI-5B Signal Conditioners have typical lead times of 2 weeks ARO.
Order Online! See the Advantages to Placing your orders online.

DI-5B Industrial Signal Conditioning Modules DatasheetDI-5B36 Datasheet (pdf)

DI-5B Industrial Signal Conditioning Modules DatasheetGeneral 5B module Datasheet (pdf)

Export Data to ExcelHow to Export Recorded Data to Excel

WinDaq Data Acquisition SoftwareWinDaq Software

Compatible Products

DI-785 Industrial Data Acquisition System

DI-785 Features 32 channels designed specifically for DI-5B modules, 14-bit resolution, and up to 180 kHz sample throughput rate.

DI-75B backpack

DI-75B Backpack 5B module expansion device for DI-715B, DI-720, DI-722, and DI-730 instruments featuring 8 channels designed specifically for DI-5B modules

DI-5B Modules

  • DI-5B30 Analog Voltage Input Modules (±10mV to ±100mV), Narrow Bandwidth
  • DI-5B31 Analog Voltage Input Modules (±1V to ±40V), Narrow Bandwidth
  • DI-5B32 Analog Current Input Modules
  • DI-5B33 Isolated True RMS Analog Voltage Input Modules
  • DI-5B34 Linearized 2- or 3-Wire RTD Input Modules
  • DI-5B35 Linearized 4-Wire RTD Input Modules
  • DI-5B36 Potentiometer Input Modules
  • DI-5B38 Strain Gage Input Modules
  • DI-5B38-100 Programmable Strain Gage Signal Conditioner
  • DI-5B40 Analog Voltage Input Modules (±10mV to ±100mV), Wide Bandwidth
  • DI-5B41 Analog Voltage Input Modules (±1V to ±40V), Wide Bandwidth
  • DI-5B42 2-Wire Transmitter Interface Modules
  • DI-5B43 Isolated DC Transducer Amplifier Input Modules
  • DI-5B45 Frequency Input Modules
  • DI-5B47 Linearized Thermocouple Input Modules
  • DI-5B48 Accelerometer Input Module
  • DI-5BICP Amplifiers for ICP-style Piezoelectric Transducers
  • DI-5B Module Accessories (backplanes and power supply)
data acquisition selection and data logger product screener

Try out our NEW data acquisition and data logger product screener for help choosing the right product for your application

Also check out these similar products:

DI-8B Industrial signal conditioning modules

DI-8B Modules Small, Low-Cost, High Performance, Plug-In Signal Conditioning Modules

WinDaq Data Acquisition SoftwareWinDaq/Lite
Data Acquisition Recording and Playback Software (FREE)

WinDaq Data Acquisition SoftwareWinDaq/HS
High Speed Data Acquisition Recording and Playback Software

WinDaq Data Acquisition SoftwareWinDaq/Pro
High Speed Data Acquisition Recording and Playback Software.

WinDaq Data Acquisition SoftwareWinDaq/Pro+
High Speed Data Acquisition Recording and Playback Software allowing you to sample different channels at different rates.

WinDaq/XLWinDaq/XL
Ports data directly to Windows Excel

ActiveX ControlsActiveX Controls
For programming solutions (FREE)

Knowledge Base and Common Support Issues

The Importance of Isolation

Dimensions and Pinout

Pass-through connections to jump a 5B module socket

How To Calibrate Strain Gage-Based Transducers Using DI-5B38 Strain Amplifiers

Go to the Support Forum

Submit a Support Ticket