Thermocouple Assembly
Download printable pdf version
Follow these instructions to connect a thermocouple to your miniature connector:
- Unscrew and remove the top of the miniature connector.
- Remove the rubber washer from the miniature connector and slide it over the tip of the thermocouple wire.
- Partially loosen the inside screws.
- Insert the wires under the appropriate screws and tighten.
- K-Type thermocouples: Yellow to +, Red to -
- J-Type thermocouples: White to +, Red to -
- T-Type thermocouples: Blue to +, Red to -
- Place the top back on the miniature connector and tighten the screws.
