Product Highlights

• Desktop or panel mount
• IP65 protects against dust and moisture
• 5.7in. real-time color display
• 10 analog input channels (voltage, thermocouple, RTD, and humidity)
• 4 logic/pulse inputs
• 4 relay alarm outputs
• Records to USB memory stick
• Auto data archive via LAN

The MT100 is a feature-packed process monitor for nearly any industrial application to replace traditional chart and circular recorders, digital and analog panel meters, and other less capable monitoring equipment. Its 10 isolated analog input channels are complemented by four logic channels that are programmable as either discrete or pulse inputs. The 10 analog channels may be programmed on a channel-by channel basis to measure voltage from ±20mV to 50V full scale across 12 ranges, thermocouple- or RTD-based temperature, or 4-20 or 0-20 mA current loops. Nearly all thermocouple types are supported; along with both PT100 and PT1000 RTDs. MT100 logic inputs detect state changes, while pulse inputs may be used for count and/or rate determinations. A separate trigger input allows the instrument to synchronize its measurements to external events. The MT100 measures humidity using either a built-in dry bulb/wet bulb calculation, or by using an optional humidity probe. All measurements are displayed in real time on its built-in color display, and may be simultaneously recorded to internal memory, a standard removable USB memory stick, or to a LAN-based file server. Each of four alarm outputs with flexible trigger definitions allow the MT100 to handle any alarm load up to 250 VAC /2 A, meaning that the MT100 can directly control most lights or audible alarms without external circuitry. If it's connected to a PC on its LAN connection it can even send you an email during an alarm event.

Wide Voltage Measurement Range

Each M100 analog channel can measure from 20 mV to 50 VFS across 12 programmable measurement ranges.

Full Electrical Isolation Per Channel

Each analog M100 channel is electrically isolated from all others and from instrument ground to allow accurate and safe measurements in industrial applications where ground potential differences are common.

Multiple Measurement Functions

Use the M100 to measure voltages, currents, 4/0-20 mA process current loops, thermocouple- and RTD-based temperatures and humidity.

Two Humidity measurement modes

The M100 features a canned dry/wet bulb calculation for humidity measurements, or use the optional B-530 humidity sensor.

Three Data Recording Modes

The MT100 creates a permanent record of recorded data in one of three ways: To its internal 12 MB memory; to a USB memory stick; to a connected FTP file server over a LAN. File sizes as large as 2GB are supported.

Four Discrete Inputs

The MT100 provides discrete input channels that can be used for counting and rotational speed measurement applications. Or program the discrete inputs as simple logic level input channels.

Four Alarm Outputs

Program the MT100 to trigger its alarm outputs as a function of analog input signal level judgment, pulse judgment, or logic pattern. Built-in relays on each channel simplify external wiring. Alarms can be triggered from analog data based on simple threshold, window in, window out, and rate of change definitions.

Bright TFT LCD Color Display

The focal point of the MT100 is its built-in 5.7-inch color display that allows real time trending, data review, and complete instrument configuration.

Wide Sample Interval Selections

Sample intervals can be programmed to be one of eighteen values ranging from 100 ms to one hour.

Engineering Units Scaling

Each MT100 channel allows up to four break points to be programmed for accurate scaling into meaningful units like psi, grams, newtons, gallons per minute, etc.

Flexible Triggering Options

Allows data capture to be started or stopped based upon signal level, an external event, date/time, alarm, duration, or Boolean channel combinations. Analog signal triggers can be programmed based upon level and window tests: above threshold, below threshold, inside window, or outside window.

Real Time and Post-recorded Calculations

The MT100 may be programmed to calculate average value, peak value, minimum value, rms, and arithmetic operations (+,-,×,/) between channels.

Built-in LAN and Web Server

The MT100 provides an Ethernet connection that allows data file transfers, remote control, real time monitoring, and email alarms.

Panel-mount or Optional Desktop Enclosure

The MT100 can be mounted to a panel using included hardware, or purchase an optional desktop enclosure with a carrying handle for portable use.

Ordering Information, Models, and Prices

Part Number	Description	Price (US)	DATAQ Store
MT100	Paperless chart recorder and data logger with 10 isolated analog inputs that can be programmed on a channel-by channel basis to measure voltage from ±20mV to 50V full scale across 12 ranges, thermocouple- or RTD-based temperature, or 4-20 or 0-20 mA current loops. Includes calibration certificate traceable to NIST, PC-based software, and AC adaptor.	$3295	Quantity:

Note: We do not accept orders for Graphtec data loggers (GL220, GL820, GL900, and MT100) to shipping or billing addresses outside of North/Central/South America.

Note: The MT100 is NOT compatible with WinDaq or WinDaq/XL Software packages.

Optional MT100 Chart Recorde and Data Logger Accessories

Part Number	Description	Price (US)	DATAQ Store
B-541	Desktop Case Portable desktop enclosure with handle for portability. View Photo.	$650	Quantity:
B-530	Humidity Sensor 3-meter with dedicated power connector.	$470	Quantity:
R250	Resistor Precision 250 Ω resistor, 0.1%. Learn More about 4-20mA current loop data acquisition.	$0.99	Quantity:

Note: The MT100 is NOT compatible with WinDaq or WinDaq/XL Software packages.

Contact Customer Support

Knowledge Base and Common Support Issues

Go to the Support Forum for support