Data Acquisition Selection Guide Wizard

I use transducers with a millivolt output to measure Load, Pressure, Torque, Strain, etc.
Yes     No

I want to measure process current signals (4 to 20 mA).
Yes     No

My ONLY measurement is temperature using thermocouples.
Yes     No

I have voltage measurements in this range (select all that apply):

	between 10mV and 1V	Yes     No
	between 1V and 10V	Yes     No
	between 10V and 20V	Yes     No
	between 20V and 40V	Yes     No
	between 40V and 64V	Yes     No
	between 20V and 1000V	Yes     No

My application requires Isolation.
     Yes     No

Select the most channels you will use at a time.

	1 to 4 Channels
	5 to 8 Channels
	9 to 16 Channels
	17 to 32 Channels
	more than 32 Channels

Throughput is the maximum sample rate required by any channel, multiplied by the number of acquired channels.

	240 Hz
	1000 Hz
	4800 Hz
	14400 Hz
	150000 to 200000 Hz

I want to use a connected PC to acquire data.   I want the instrument to acquire data independent of the PC (stand-alone).