Product Highlights

• Low-Cost, Portable, Ethernet Data Logger (USB to Ethernet converter available). This product is similar to the DI-710 Data Logger but with Signal Conditioned inputs. See also the DI-718B series for many of the same features but in a much smaller package using DI-8B modules.
• 8 signal-conditioned analog inputs. Add 8 more with the DI-75B backpack.
• Stand-alone data logger option allows in-the-field measurements to be saved to Secure Digital Cards (SD).
• 14-bit analog to digital conversion.
• Use the AC/DC Current Probe for measuring in cable bundles and tighter areas.
• Includes WinDaq Software.
• Record up to 10,000 samples per second (assumes SD latencies of 80 milliseconds or less) with Stand-alone models or up to 4,800 samples per second with PC-connected instruments (WinDaq/HS required to achieve recording rates over 1,108 Hz with PC-connected instruments).
• Wide variety of measurement functions and ranges based on DI-5B module selections.

The DI-715B is an eight-channel, 5B-module data logger system. Each DI-715B accepts up to eight high-performance, plug-in (DI-5B) signal conditioning modules to include virtually any isolated, industrial-type signal. Because DI-5B modules are identical in pinout and size, they can be mixed or matched in any combination. Choose from thermocouple, true rms, voltage, strain, frequency, process current, RTD, potentiometric, or DC transducer—whatever suits your application. A clear acrylic front panel allows easy identification of all installed 5B modules.

The DI-715B Series provide an option for PC-connected or stand-alone data logger operation. Instruments with the stand-alone data logger option feature a built-in multimedia socket that accepts standard Secure Digital (SD) memories to which acquired data may be stored without a connected PC. SD memories are the same commonly available mass storage devices used with digital cameras and MP3 players. Memories ranging in size from 32MB to 2GB are supported. Instruments without this option must remain tethered to a PC’s USB or Ethernet port during data acquisition and use the PC’s own program and memory to store acquired data. Software selectable gain ranges of 1, 2, 4, and 8 are supported.

Make Industrial Measurements Through DI-5B Plug-in Signal Conditioning Modules

Each channel on the DI-715B accomodates one DI-5B module providing a single channel of isolated input protection, amplification, and filtering. DI-5B modules are plugged into a socketed backplane and are secured with a mounting screw. Each DI-715B channel has 4 corresponding screw terminals for your signal connections: channel +, channel-, excitation +, and excitation -. These terminals satisfy all transducer inputs and provide sensor excitation if necessary. Access to the DI-5B modules is through a removable front panel.

Powerful Data Acquisition Server Capability

DI-715B Stand-alone data loggers are the first in their price range to offer data acquisition server capability. Acting as a server allows stand-alone instruments to locally and independently acquire data to their memory cards, and then make that acquired data available upon demand, either by plugging the memory card into a reader, or uploading via the Ethernet interface.

Ethernet-enabled DI-715Bs provide the most power and flexibility. A DI-715B with an Ethernet interface and built-in memory transparently becomes like any other computer on a network, able to share recorded data over a network to a PC on the other side of the facility, or over the Internet to a PC on the other side of the world. These stand-alone instruments can be added easily and seamlessly to existing networks without incremental bandwidth burdens, storing data in memory and uploading on demand. Stand-alone data loggers can also be controlled locally using multifunction push-button control and multi-colored, red, green, orange LED status indicator. To learn more about the DI-715B's powerful stand-alone capabilities, click here.

Recommended Memory Card

For optimal performance, DATAQ Instruments, Inc. recommends using a Lexar Professional 133X 1 Gigabyte Secure Digital Flash Memory Card to record your data. Memory cards are available through our online store.

Fast Throughput Rate

Supports sample throughput rates to 10,000 samples per second (assumes SD latencies of 80 milliseconds or less) to SD with stand-alone Models and 4800 samples per second to PC with PC-connected Models. WinDaq/HS is required to achieve recording rates over 1,108 Hz with PC-connected instruments.

Easy to Connect & Use

Installs in seconds. Simply connect to your computer's USB port or an Ethernet port using the supplied cable. Connect power, then connect your signals to the provided screw terminal blocks. Stand-alone models just need a memory card and power.

Expandable

Add 8 more signal conditioned input channels with a DI-75B 5B module backpack. Fully mountable with optional stacking brackets.

Includes WinDaq Software

Be up and running minutes out of the box with WinDaq acquisition and playback software. WinDaq/Lite software is included free with the purchase of every DI-715B instrument. WinDaq/Lite operates at a maximum throughput recording rate of 1,108 Hz with a DI-715B Instrument. A special version of WinDaq acquisition software may be purchased (WinDaq High Speed Option) allowing you to record data at the speed of the instrument (up to 4800 Hz).

WinDaq Waveform Browser, our unrestricted playback and analysis software for Windows, is also included free with the purchase of every DI-715B. Use it to review, measure, compare, and analyze the waveform file after it has been recorded by WinDaq acquisition software. WinDaq software products support up to 14 bits of measurement resolution.

Looking for the same features without signal conditioned inputs?

Our DI-710 Series Data Logger provides all the same great features as the DI-715B Series and more - without the built-in DI-5B backplane. Click Here to learn more.

Ordering Information, Models, and Prices

Part Number	Description	Price (US)	DATAQ Store
DI-715B-E	The DI-715B is no longer available. Consider the DI-718B as a direct replacement (uses DI-8B modules as opposed to DI-5B modules).
DI-715B-ES
DI-715B Bundles

Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country. DI-5B modules are NOT included with the purchase of ANY DI-715B instrument and must be ordered individually.

Contact Customer Support

DI-715B Data Logger Software and Accessories

Part Number	Description	Price (US)	DATAQ Store
DI-5B Modules	DI-5B modules are required to use a DI-715B instrument. These modules are not included with the purchase of ANY DI-715B product or bundle. Learn more about DI-5B modules.	$150 to $265 each	Learn more about DI-5B Modules
WinDaq/HS-715B	Special High-Speed version of WinDaq/Lite. Record at the speed of the instrument when acquiring directly to a PC. Not required when acquiring to built-in memory. CD will be shipped (shipping charges apply). Learn More Here.	$595	Quantity:
WinDaq/HS-715B EMAIL	Special High-Speed version of WinDaq/Lite. Unlock Code ONLY. No CD will be shipped. This is for people who have purchased the hardware product and would like to upgrade to High Speed (see Activation Instructions).	$595	Quantity:
101014-EA	External USB to Ethernet converter. Allows you to connect your DI-715B to your USB port. Adds an external Ethernet card to your PC. Learn More...	$30	Quantity:
101014-2G	Lexar Professional 133X 2 Gigabyte Secure Digital Flash Memory. For use with stand-alone models only.	$39	Quantity:
101014-CR	USB Secure Digital Memory Card Reader.	$25	Quantity:
DI-75B-7	8-channel signal conditioned input expander. Includes interconnecting and power cables. Learn More Here.	$845	Quantity:

Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country. DI-5B modules are NOT included with the purchase of ANY DI-715B instrument and must be ordered individually.

Contact Customer Support

Knowledge Base and Common Support Issues

Ethernet Installation to DHCP network

Ethernet Installation to Static IP network

Ethernet Installation Directly-connected (one DI-71x to one PC)

Knowledge Base

How to Export Recorded Data to Excel

USB Installation

DI-71x USB Lock-Up

Ethernet Resources...

USB-to-Ethernet Adapters

Three Easy Steps to Stand-alone Data Logging

Stand-alone data logger features

Record Time Calculator

Intelligent Oversampling Methods Extend Measurement Flexibility

How To Choose Strain Gage-based Transducers for PC-based Data Acquisition Applications

Strain Gage-Based Transducer and Amplifier Selection and Calibration

Frequency and True RMS Data Acquisition

Learn the Importance of Isolation In Four Easy Lessons

Support Forum