Product Quick Links

Data Acquisition and Data Logger Product Screener
Find the right product for you
with our Product Screener

DI-5B48 Accelerometer Input Modules

2.5kHz to 20kHz Bandwidth

DI-5B Industrial Signal Conditioning Data Acquisition Module

Product Highlights

  • ±10V Output Range
  • 1500Vrms Transformer Isolation
  • ANSI/IEEE C37.90.1 Transient Protection
  • Input Protection to 240Vrms Continuous
  • 1, 10, and 100 Programmable Gain
  • 2.5, 5, 10, and 20kHz Programmable LP Filter
  • 0.2 and 10Hz Programmable HP Filter
  • 4mA or 9mA Programmable Current Excitation
  • ±0.2% Accuracy
  • ±0.01% Linearity
  • Low Drift with Ambient Temperature
  • -40°C to +85°C Operating Temperature
  • CSA certification pending
  • Mix and Match DI-5B Types

The DI-5B48 provides excitation to piezoelectric sensors with built-in microelectronic amplifiers, commonly known as ICP®* or IEPE* or LIVM* sensors. The module provides a constant current excitation to the sensor, then isolates, filters, and amplifies the sensor output, yielding a high-level analog voltage output. The excitation current, signal gain, and filter high-pass and low-pass cutoff frequencies are field-configurable through a set of slide switches.

Six poles of signal filtering in the DI-5B48 module result in greater than 100dB of normal-mode rejection for signal frequencies above the cutoff frequency. One pole of filtering is on the field side of the isolation barrier for anti-aliasing purposes and the remaining five-pole programmable Bessel filter is located on the system side. High-pass filtering is achieved through a second order passive filter, located on the field side. If desired, the output switch can be turned on continuously by simply connecting pin 22, the Read-Enable pin, to I/O Common, pin 19.

The DI-5B48 offers the option of setting the constant current source for sensor excitation to common values of 4mA or 9mA with a compliance voltage of 24VDC. Programmable gains of 1, 10 and 100 are selectable and the module offers a ±10V output. The required supply level is +5VDC, ±5%.

To ensure protection of expensive data acquisition equipment, the DI-5B48 module signal inputs and sensor excitation outputs are protected against accidental connection of voltages up to 240Vrms.

Want to port your data into a spreadsheet or a database?

Check out our add-on software:

Port Data Acquired with your DI-710 Data Logger to Excel

WinDaqXL This WinDaq Software data acquisition add-on allows you to port acquired data directly into a Microsoft Excel Spreadsheet in real time. 60-day Trial Version available.

Also check out the DATAQ Developer Network to learn how to use our ActiveX controls with Microsoft Excel and Access.

Port Data Acquired with your DI-710 Data Logger to MySQL

WinDaq/MySQL This free WinDaq Software data acquisition add-on allows you to port acquired data directly into a MySQL database in real time.

Ordering Information, Models, and Prices

View Shopping Cart
Part Number Input Range Output Range Bandwidth Price
(US)
DATAQ Store
DI-5B48-01 ±10V max ±10V 2.5kHz to 20kHz $265
Quantity: 
Accessories Backplanes and Power Supplies. N/A Go to Accessories

Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country.
DI-5B Signal Conditioners have typical lead times of 2 weeks ARO.
Order Online! See the Advantages to Placing your orders online.

Multimedia Tutorials and Demonstrations

These videos are relevant to compatible data acquisition systems.

Export Data to ExcelHow to Export Recorded Data to Excel

WinDaq Data Acquisition SoftwareWinDaq Software

Software

Compatible data acquisition systems use the following software packages. Be sure to check your hardware datasheet to verify software compatibility.

WinDaq Data Acquisition SoftwareWinDaq/Lite
Data Acquisition Recording and Playback Software (FREE)

WinDaq Data Acquisition SoftwareWinDaq/HS
High Speed Data Acquisition Recording and Playback Software

WinDaq Data Acquisition SoftwareWinDaq/Pro
High Speed Data Acquisition Recording and Playback Software.

WinDaq Data Acquisition SoftwareWinDaq/Pro+
High Speed Data Acquisition Recording and Playback Software allowing you to sample different channels at different rates.

WinDaq/XLWinDaq/XL
Ports data directly to Windows Excel

ActiveX ControlsActiveX Controls
For programming solutions (FREE)

Compatible Products

DI-785 Industrial Data Acquisition System

DI-785 Features 32 channels designed specifically for DI-5B modules, 14-bit resolution, and up to 180 kHz sample throughput rate.

DI-75B backpack

DI-75B Backpack 5B module expansion device for DI-715B, DI-720, DI-722, and DI-730 instruments featuring 8 channels designed specifically for DI-5B modules

DI-5B Modules

  • DI-5B30 Analog Voltage Input Modules (±10mV to ±100mV), Narrow Bandwidth
  • DI-5B31 Analog Voltage Input Modules (±1V to ±40V), Narrow Bandwidth
  • DI-5B32 Analog Current Input Modules
  • DI-5B33 Isolated True RMS Analog Voltage Input Modules
  • DI-5B34 Linearized 2- or 3-Wire RTD Input Modules
  • DI-5B35 Linearized 4-Wire RTD Input Modules
  • DI-5B36 Potentiometer Input Modules
  • DI-5B38 Strain Gage Input Modules
  • DI-5B38-100 Programmable Strain Gage Signal Conditioner
  • DI-5B40 Analog Voltage Input Modules (±10mV to ±100mV), Wide Bandwidth
  • DI-5B41 Analog Voltage Input Modules (±1V to ±40V), Wide Bandwidth
  • DI-5B42 2-Wire Transmitter Interface Modules
  • DI-5B43 Isolated DC Transducer Amplifier Input Modules
  • DI-5B45 Frequency Input Modules
  • DI-5B47 Linearized Thermocouple Input Modules
  • DI-5B48 Accelerometer Input Module
  • DI-5BICP Amplifiers for ICP-style Piezoelectric Transducers
  • DI-5B Module Accessories (backplanes and power supply)
data acquisition selection and data logger product screener

Try out our NEW data acquisition and data logger product screener for help choosing the right product for your application

Also check out these similar products:

DI-8B Industrial signal conditioning modules

DI-8B Modules Small, Low-Cost, High Performance, Plug-In Signal Conditioning Modules

 
Home | Products | Support | Sales | Applications
Sitemap | Checkout | RSS FeedSubscribe to our Data Acquisition RSS Feed | Twitter
Data Acquisition | Data Logger | Chart Recorder | Thermocouple