site map | search
Home         Products        Support         Sales        Applications        Checkout

Low-Cost Data Acquisition Starter Kit

Click Here

Miscellaneous Software

AT CODAS, Programmer's SDK, WinDaq/Scope, WinDaq/CE, DI-900MB Configuration, and DI-400 Series Configuration Files
The following files are self-extracting executables, simply click on the desired file to start the download process. Create a new directory on your hard disk named disk1 and place the downloaded file in this new directory. When the download is complete, run the executable (the .exe file) to extract the individual program files.
AT CODAS (510Kb) Revision 6.03
Programmer's SDK (557Kb) Revision 2.93
WinDaq/Scope (1.6Mb)
For DI-770 Oscilloscope products only. Note: You must un-install the old driver before installing the new one.
DI-400 Series Configuration Files  (17Kb)
PnP version
DI-400 Series Configuration Files (1Kb)
Non-PnP version
DI-224 Special Upgrade (20Kb)
Revised 25 March 97.
DI-720/DI-730 USB flash ROM update  
DI-720/DI-730 Ethernet flash ROM update  
DI-900MB Series Configuration Software (8.8MB)
For DI-900MB Series only.
ActiveX Controls (1000Kb)
Includes example VB and LabVIEW programs. Click here to find out more.
WinDaq/XL (4.25Mb)
To complete download, you must have the most recent version (2.5) of the WinDaq software you use (Lite/Pro/Pro+). If you have purchased WinDaq/XL, you will need your Product ID for a full installation, otherwise you can install it as a 60 day trial. Click here to find out more.
VisualBASIC, Visual C++, Excel, Delphi, TestPoint, VEE & Labview Programming for WinDaq Starter Kit
 

 
         
 

Data Acquisition Product Links:

(click on text to jump to page)

Data Acquisition | Data Logger | Chart Recorder | Thermocouple
Oscilloscope | Load Cell | Pressure Sensor
© 2007 DATAQ Instruments, Inc. All rights reserved.  Date last edited 10/29/2007
 Webmaster