Configure Channels > Example

Previous | Next

Example

Accelerator key version

Keystrokes	Comments
F5	"F5” activates the channel configuration function.
2	Add Channel 2 to the list.
ENTER	(required to add or remove channels)
-2	Remove channel 2 from the list.
ENTER	(required to add or remove channels)
Any key (other than "D"or "I")	Exits

Keystrokes	Comments
F5	"F5" activates the channel configuration function.
SPACEBAR	Toggles Channel 1 active/inactive.
→→	Moves to Channel 3
SPACEBAR	Toggles Channel 3 active/inactive.
ENTER	Exits Channel Configuration.

For Serial Port Products Only

Accelerator key version

Keystrokes	Comments
F5	"F5” activates the channel configuration function.
2 4 7 5I 1D 8D	Add single-ended channels 2, 4, 7, digital channel 5, and differential channels 1 and 8 to the list. Note that and ENTER keystroke must follow each channel entry.
-2	Remove channel 2 from the list.
15	Attempting to add single-ended channel 15 to the list.
7D	Changing single-ended channel 7 to differential. Removes single-ended channel 15 from the list since this channel number is required to form the differential pair for channel 7.

For All Other Products

Accelerator key version

Keystrokes	Comments
F5	“F5” activates the channel configuration function.
SPACE BAR	Deactivates channel 1.
→→→→→→+	Activates channel 8 and designates it as differential (channel 8 is designated + and channel 16 -).
→ SPACE BAR	Activates single-ended channel 10.