DATAQ Logo site map | search
Home         Products        Support         Sales        Applications       Checkout

Low-Cost Data Logger Starter Kit

Click Here

DI-5B45 Frequency Input Modules

0 to 100kHz Input Range

DI-5B Industrial Signal Conditioning Data Acquisition Module

 
  • Accepts Frequency Inputs of 0 to 100kHz
  • Provides High Level Voltage Outputs
  • TTL Level Inputs
  • 1500 Volt Transformer Isolation
  • ANSI/IEEE C37.90.1-1989 Transient Protection
  • Input Protected to 240VAC Continuous
  • ±0.05% Accuracy
  • CSA Certified
Back to Top
Part Number Maximum Input Excitation Price
(US)		 DATAQ Store
DI-5B45-01 0 to 500Hz +5.1VDC @ 8mA $180
Quantity:
DI-5B45-02 0 to 1kHz +5.1VDC @ 8mA $180
Quantity:
DI-5B45-03 0 to 3kHz +5.1VDC @ 8mA $180
Quantity:
DI-5B45-04 0 to 5kHz +5.1VDC @ 8mA $180
Quantity:
DI-5B45-05 0 to 10kHz +5.1VDC @ 8mA $180
Quantity:
DI-5B45-06 0 to 25kHz +5.1VDC @ 8mA $180
Quantity:
DI-5B45-07 0 to 50kHz +5.1VDC @ 8mA $180
Quantity:
DI-5B45-08 0 to 100kHz +5.1VDC @ 8mA $180
Quantity:
Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country.
DI-5B Signal Conditioners have typical lead times of 2 weeks ARO.
Order Online! See the Advantages to Placing your orders online.
Back to Top

DI-5B38 Highlights

Each DI-5B45 frequency input module provides a single channel of frequency input which is isolated and converted to a high level analog voltage output. This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without the requirement of external multiplexers.

The frequency input signal can be a TTL level signal or a zero-crossing signal. Terminal 3 (+In) on the field-side terminal block is the "common" or ground connection for input signals. A TTL signal is connected from terminal 2 (-In) to terminal 3 (+In), while a zero-crossing signal is connected from terminal 4 (+EXC) to terminal 3 (+In). Input circuitry for each of the signal types has hysteresis built in. An input signal must cross entirely through the hysteresis region in order to trigger the threshold comparator.

A 5.1V excitation is available for use with magnetic pick-up or contact-closure type sensors. The excitation is available on pin 1 (-EXC) and the excitation common is pin 3 (+In).

The DI-5B45 is designed with a completely isolated computer side circuit that can be floated to ±50V from power common, pin 16. This complete isolation means that no connection is required between I/O common and power common for proper operation of the output switch.

A special circuit in the input stage of the module provides protection against accidental connection of power-line voltages up to 240VAC.
Back to Top

Want to port your data into a spreadsheet or a database?

Check out our add-on software:
Port Data Acquired with your DI-710 Data Logger to Excel

WinDaqXL This WinDaq Software data acquisition add-on allows you to port acquired data directly into a Microsoft Excel Spreadsheet in real time. 60-day Trial Version available.

Also check out the DATAQ Developer Network to learn how to use our ActiveX controls with Microsoft Excel and Access.
Port Data Acquired with your DI-710 Data Logger to MySQL

WinDaq/MySQL This free WinDaq Software data acquisition add-on allows you to port acquired data directly into a MySQL database in real time.
         
 

Data Acquisition Product Links:

(click on text to jump to page)

Data Acquisition | Data Logger | Chart Recorder | Thermocouple
Oscilloscope | Load Cell | Pressure Sensor
© 2008 DATAQ Instruments, Inc. All rights reserved. Date last edited 4/2/2008. mail Webmaster