Site Search:

Model DI-8B40-01

Isolated ±10mV 8B-style Amplifier

$ 133 each
In Stock with limited availability, 2-8 week lead time for higher quantity
  • -10mV to +10mV input range
  • High Level Voltage Output
  • 1500Vrms Transformer Isolation
  • ANSI/IEEE C37.90.1 Transient Protection
  • Input Protected to 240VAC Continuous
  • 100dB CMR
  • 1kHz Signal Bandwidth
  • ±0.05% Accuracy
  • ±0.02% Linearity
  • Low Drift with Ambient Temperature
  • CSA, FM and CE Certifications Pending
  • Mix and Match Modules
  • View Dimensions and pinout
Tweet this page Like this product on Facebook Share this page on LinkedIn Email this page
DI-8B DAQ Amplifiers
This amplifier module measure -10 to +10mV.This amplifier module has 1kHz bandwidth.This data acquisition system has a 30-day Money back guaranteeThis amplifier is manufactured in the United States of America

Description

8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B40 or 8B41 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output.

Signal filtering is accomplished with a 5-pole filter optimized for time and frequency response which provides 100dB per decade of normal-mode rejection above 1kHz. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other four are on the system side.

A special input circuit on the 8B40 and 8B41 modules provides protection against accidental connection of power-line voltages up to 240VAC. Clamp circuits on the I/O and power terminals protect against harmful transients.

Isolation is provided by optical coupling to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, ±5%.

The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.

Accessories

8BP02

2-Position Backplane

$ 95
8BP02

Description

2-position analog I/O backplane, non-multiplexed. For use with DI-8B Modules. View the 8BP02 schematic or the 8BPxx schematic or download the pdf.

8BP04

4-Position Backplane

$ 153
8BP04

Description

4 channel backplane. Each module has its own analog bus. For use with DI-8B Modules. View the 8BP04 schematic or the 8BPxx schematic or download the pdf.

8BP08

8-Position Backplane

$ 228
8BP08

Description

8 channel backplane. Each module has its own analog bus. For use with DI-8B Modules. View the 8BP08 schematic or the 8BPxx schematic or download the pdf.

8BP16

16-Position Backplane

$ 355
8BP16

Description

16 channel backplane. Each module has its own analog bus. For use with DI-8B Modules. View the 8BP16 schematic or the 8BPxx schematic or download the pdf.

DI-5B-PS

Power Supply

$65.00
Power Supply

Description

5V DC Power Supply for use with both DI-5B and DI-8B Backplanes.

Specifications

Input Range: ±10mV
Input Bias Current: ±0.5nA
Input Resistance: Normal: 50MΩ
Power Off: 100kΩ
Overload: 100kΩ
Input Protection: Continuous: 240VAC (8B30-01: 120VAC)
Transient: ANSI/IEEE C37.90.1
CMV, Input to Output: 1500Vrms
Transient, Input to Output: ANSI/IEEE C37.90.1
CMR (50Hz or 60Hz): 100dB
NMR: 100dB per decade above 1kHz
Accuracy: ±0.05% Span (Includes nonlinearity, hysteresis and repeatability)
Nonlinearity: ±0.02% Span
Stability: Offset: ±10ppm/ºC
Gain: ±50ppm/ºC
Noise: Output, 100kHz: 500µVrms
Bandwidth, -3dB: 1kHz
Response Time, 90% Span: 550μs
Output Range: ±5V
Output Protection: Transient: Continuous Short to Ground
ANSI/IEEE C37.90.1
Power Supply Voltage: +5VDC ±5%
Power Supply Current: 25mA
Power Supply Sensitivity: ±75ppm/%
Mechanical Dimensions: 1.11" × 1.65" × 0.40"
(28.1mm × 41.9mm × 10.2mm)
Operating Temperature: -40ºC to +85ºC
Storage Temperature: -40ºC to +85ºC
Relative Humidity: 0 to 95% Noncondensing

Compatible Products