DI-8B33 Isolated True RMS Input Modules

100mV to 300V RMS Input Range

Product Features

  • Interfaces RMS Voltage (100mV to 300V)
  • Designed For Standard Operation With Frequencies of 45Hz to 1kHz (Extended Range to 20kHz)
  • Compatible With Standard Current and Potential Transformers
  • ±0.25% Factory Calibrated Accuracy (Accuracy Class 0.2)
  • 1500 VRMS Continuous Transformer Based Isolation
  • Input Overload Protected to 480V Max (Peak AC and DC) or 10A RMS Continuous
  • ANSI/IEEE C37.90.1-1989 Transient Protection

Products in the Series

DI-8B Amplifiers
  • 0-100 mV rms measurement range
  • 45 Hz to 10 kHz bandwidth
  • Passes 45 Hz to 10 kHz signals
  • Isolation supports off-ground measurements
$184.00
Qty: 
DI-8B Amplifiers
  • 0 to 1 V rms measurement range
  • 45 Hz to 10 kHz bandwidth
  • Passes 45 Hz to 10 kHz signals
  • Isolation supports off-ground measurements
$184.00
Qty: 
DI-8B Amplifiers
  • 0 to 10 V rms measurement range
  • 45 Hz to 10 kHz bandwidth
  • Passes 45 Hz to 10 kHz signals
  • Isolation supports off-ground measurements
$184.00
Qty: 
DI-8B Amplifiers
  • 0 to 150 V rms measurement range
  • 45 Hz to 10 kHz bandwidth
  • Passes 45 Hz to 10 kHz signals
  • Isolation supports off-ground measurements
$184.00
Qty: 

DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B33 module isolates, filters and amplifies a True RMS input signal and provides an analog voltage output.

Signal filtering is accomplished with a three-pole filter optimized for time and frequency response which provides 70dB of normal-mode-rejection at 60Hz. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other two are on the system side.

A special input circuit on the DI-8B33 module provides protection against accidental connection of power-line voltages up to 30VAC.

Isolation is provided by optical coupling to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, ±5%.

The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.