View Cart
sales@dataq.com
330-668-1444Data Acquisition Accessories
Search:
Description
Spare 5-pin power connector for DI-718Bx, DI-720, DI-722, and DI-730 instruments.
Description
Rack mounting kit for DI-785 and DI-788 Industrial Data Acquisition systems.
Description
BLACK shrouded banana plugs - both ends - silicone.
Description
RED shrouded banana plugs - both ends - silicone.
Description
BLACK Right angle insulated plunger hook clip.
Description
RED Right angle insulated plunger hook clip.
Description
Not all rechargable batteries are created equal. In addtion to charging your phone, we test and make sure our battery can power DI-2160, DI-2108, DI-2108P, DI-4108 or DI-4208 for standalone recording that lasts for days. 20000mAH capacity. Buy two to operate standalone recording with one while charging another. 10% Educational Discount
Description
Replacement 16-port removable screwless push-in spring connection terminal block
Description
Replacement 16-port removable screw terminal block for TOP of screw terminal block receptacle in DI-78B, DI-710, DI-718B, DI-4718B, DI-718Bx, DI-785, DI-788, and DI-808 products.
Description
Replacement 16-port removable screw terminal block for BOTTOM of screw terminal block receptacle in DI-78B, DI-710, DI-718B, DI-4718B, DI-718Bx, DI-785, DI-788, and DI-808 products.
Description
32GB 3.0 USB flash drive for stand-alone recording up to 10,000 Samples per second throughput.
101014-2G
2GB SD Card (High Speed)
Discontinued by Pansonic
Description
High-speed 2GB SD memory card allows recording to the full stand-alone sample rate limit of the host data logger.
Description
2GB SD memory card allows recording up to a 2 kHz sample throughput rate. See model 101014-2G for a faster memory solution.
Description
USB Secure Digital Memory Card Reader connects to the USB port of any PC and allows data recorded to SD memory to be transferred to the PC for review and analysis.
Description
Spare power supply for DI-710, DI-718B, and DI-1000TC products.
Description
Spare power supply for DI-808 and DI-4730 products.
Description
AC Adapter for Sensor (such as 4-20mA) Excitation. Input: AC 100V-240V 50/60Hz; Output: 12V, 2A. Power Cable Length: 36.6 inch (0.9m).
Description
Allows you to power data logger with a battery. Input voltage: DC8-35V, (12V/24V changes to 5V); Output parameter: DC5V 3A, 15W MAX
Description
One (1) spare signal input fuse (8 are included with device).
Description
DC power connector for powering the DI-808 or DI-4718B from a source other than the provided ac adaptor.
Description
Powered 7 port USB hub to synchronize multiple USB devices. Please note: Not all DATAQ Instruments devices support synchronization - check your product datasheet or product page for detailed information. Note: Provided with a US ac adaptor only, and is not suitable for use in countries that require an ac mains connector other than the US type.
Description
2000361 pressure sensor measures PSI ranges of 0-30 up to 0-500 PSI dependant on model. Made with 316 stainless steel and high temperature auto-graded plastic. 2% Accuracy. 0.5V – 4.5V linear voltage output.
Description
YF-S201 Flow Sensor Measures 1-30L/min. Light weight, small size, durable, and easy to install. Inlaid with stainless steel impeller shaft. Lowest working voltage: DC4.5 5V-24V; Max current: 15 mA (DC 5V); Max operation temp: 120°C. Learn more.
Description
BNC Male to Male Connector. Converts female BNC connection to male. Most frequently used with a CABL-4 cable where gender change is required.
Description
BNC to banana jack Adapter. Safety insulated male BNC to dual 4mm banana jacks. For use with the GL900 midi Data Logger.
Description
Latest version upgrade for Advanced CODAS. Order number or purchase date must be provided during checkout.
Description
Pair of stacking brackets (with mounting screws) for DI-720 and DI-730 Series instrument cases.
Description
Pair of right-angle mounting brackets (with mounting screws) for DI-47xx and DI-7x0 Series instruments.
Description
Pair of stacking brackets (with mounting screws) for DI-4718 Series, DI-4108 Series, DI-4208 Series, DI-808 Series, DI-710 Series, DI-718B Series, and DI-100TC Series instruments
Description
Pair of angle mounting brackets (with mounting screws) for DI-4718 Series, DI-4108 Series, DI-4208 Series, DI-808 Series, DI-710 Series, DI-718B Series, and DI-100TC Series instruments
Description
37-pin D-type male to 37-pin D-type female interface cable.
Description
37-pin D-sub male to 40-pin mass terminated connector cable adapter.
Description
DC power cable and adapter kit for use with the GL900 Data Logger.
Description
Re-calibration Service, this calibration certificate is included with new instruments. NIST-traceable certificate for all DI-1000TC data acquisition and data logger products. Does not include data. Shipping charges do apply when ordering online. Learn more about Calibrating your device.
Description
Re-calibration Service, this calibration certificate is included with new instruments. NIST-traceable certificate for model DI-245 Thermocouple and Voltage data acquisition product. Includes before and after data. Shipping charges do apply when ordering online. Learn more about Calibrating your device.
Description
Re-calibration Service, this calibration certificate is included with new instruments. NIST-traceable calibration certificate for all DI-5001 data acquisition boards. Provides "after" data. Shipping charges do apply when ordering online. Learn more about Calibrating your device.
Description
Re-calibration Service, this calibration certificate is included with new instruments. NIST-traceable certificate for all DI-710, DI-718B, and DI-718Bx data acquisition and data logger products. Includes both before and after data. Shipping charges do apply when ordering online. Learn more about Calibrating your device.
Description
Re-calibration Service, this calibration certificate is included with new instruments. NIST-traceable calibration certificate for all DI-720 and DI-722 data acquisition and data logger products. Provides "after" data. Shipping charges do apply when ordering online. Learn more about Calibrating your device.
Description
Re-calibration Service, this calibration certificate is included with new instruments. NIST-traceable calibration certificate for all DI-730 data acquisition and data logger products. Shipping charges do apply when ordering online. Learn more about Calibrating your device.
Description
Re-calibration Service, this calibration certificate is included with new instruments. NIST-traceable calibration certificate for all DI-785 and DI-788 data acquisition and data logger products (DI-78B doesn't require calibration). Provides "after" data. Shipping charges do apply when ordering online. Learn more about Calibrating your device.
Description
NOT included with new instruments. NIST-traceable calibration certificate for all DI-730 data acquisition and data logger products. Includes both "before" and "after" data. Shipping charges may apply when ordering online. Learn more about Calibrating your device.
Description
16-ft USB Extension Cable. USB 2.0 Type A. Daisy chain up to 5 cables for extended length.
Description
Optional USB Cable for use with ChannelStretch™. Dual ferrite cores provide maximum protection against ground bounce that could lockup your PC's USB port during data acquisition. 20.4-inch (520 mm) overall cable length. Recommended whenever products are deployed in our ChannelStretch™ configuration.
Description
USB to RS-422 Adapter for DI-1000TC instruments. Connects the DI-1000TC to your PC's USB port. One is required per chain of DI-1000TCs.
Description
32-channel banana jack signal interface for host instruments that have differential-only measurement capability.
Description
32-channel banana jack signal interface for host instruments that have both differential and single-ended measurement capability.
Description
Ethernet repeater board. Enhanced Ethernet switch expands the distance between synchronous units over 100 meters apart. Learn more.
Description
16-channel DI-8B module expansion backpack. Includes interconnecting cable, power cable, and a pair of stacking brackets to mount on top of your Data Acquisition System. Learn more.
Description
DI-8B amplifiers offer the convenience to mix and match modules based upon measurement function and range to meet any application requirement, from the most simple to the most complex.
DI-TCE
Thermocouple Connector
$6Out of Stock
Description
Type E miniature male thermocouple connector.
DI-TCJ
Thermocouple Connector
$6Out of StockDescription
Type J miniature male thermocouple connector.
DI-TCK
Thermocouple Connector
$6Out of StockDescription
Type K miniature male thermocouple connector.
DI-TCR
Thermocouple Connector
$6Out of StockDescription
Type R miniature male thermocouple connector.
DI-TCS
Thermocouple Connector
$6Out of StockDescription
Type S miniature male thermocouple connector.
DI-TCT
Thermocouple Connector
$6Out of StockDescription
Type T miniature male thermocouple connector.
Description
One (1) spare mounting foot (3 are included with the device).
Description
Ferrite choke reduces interference for USB-based data acquisition products.
Description
Stainless steel handle for stacking brackets for DI-1000TC Series, DI-710 Series and DI-718B Series.
Description
24-V isolated, high speed DC discrete module.
Description
Spare plastic mounting nuts, hex M12x1, plastic (pair).
Description
Power Connector for DI-1000TC, DI-710, and DI-718B products.
Description
250 Ω ±0.1% Precision, Metal Film, 1/2W, Axial Resistor
Exceptionally low noise; typically 0.10 μV/V
Low voltage coefficient to ±5 ppm/V
Flame retardant coating. RoHS compliant. Learn More
Description
Spare humidity sensor for HMP60 Temperature and Humidity Probe.
Description
3-foot (0.91m) type K beaded wire teflon-coated thermocouple. Maximum operating temperature of 500°F (260°C) on the coating of the wires. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor.
Description
12-foot (3.66m) type K beaded wire teflon-coated thermocouple. Maximum operating temperature of 500°F (260°C) on the coating of the wires. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor.
Description
3-foot (0.91m) type T (best for low temperature applications) beaded wire teflon-coated thermocouple. Maximum operating temperature of 500°F (260°C) on the coating of the wires. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor.
Description
12-foot (3.66m) type T (best for low temperature applications) beaded wire teflon-coated thermocouple. Maximum operating temperature of 500°F (260°C) on the coating of the wires. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor.
Description
Custom length (over 12 feet) type K beaded wire teflon-coated thermocouple. Maximum operating temperature of 500°F (260°C) on the coating of the wires. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor. Please Note: Enter quantity for length. Please allow 7-10 business days for manufacturing.
Description
Custom length (over 12 feet) type T (best for low temperature applications) beaded wire teflon-coated thermocouple. Maximum operating temperature of 500°F (260°C) on the coating of the wires. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor. Please Note: Enter quantity for length. Please allow 7-10 business days for manufacturing.
Description
3-foot (0.91m) type J Teflon®-coated, miniature thermocouple connector. SET OF 4. Maximum operating temperature of -29 to 180°C (-20 to 356°F) on the coating of the wires. Heavy duty construction, IEC and ISA color coding, removable reversible write on window. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor.
View assembly instructions.
Description
3-foot (0.91m) type K Teflon®-coated, miniature thermocouple connector. SET OF 4. Maximum operating temperature of -29 to 180°C (-20 to 356°F) on the coating of the wires. Heavy duty construction, IEC and ISA color coding, removable reversible write on window. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor.
View assembly instructions.
Description
3-foot (0.91m) type T Teflon®-coated, miniature thermocouple connector. SET OF 4. Maximum operating temperature of -29 to 180°C (-20 to 356°F) on the coating of the wires. Heavy duty construction, IEC and ISA color coding, removable reversible write on window. 24-Gauge teflon wrap for use in moist atmospheres. Insulation provides a seal against liquid and vapor.
View assembly instructions.TL-1
Test Leads
Contact Dataq for pricing and availability
Description
Sheathed Banana Data Acquisition Cables.
Description
2-position analog I/O backplane, non-multiplexed. For use with DI-8B Modules. View the 8BP02 schematic or the 8BPxx schematic or download the pdf.
Description
4 channel backplane. Each module has its own analog bus. For use with DI-8B Modules. View the 8BP04 schematic or the 8BPxx schematic or download the pdf.
Description
8 channel backplane. Each module has its own analog bus. For use with DI-8B Modules. View the 8BP08 schematic or the 8BPxx schematic or download the pdf.
Description
16 channel backplane. Each module has its own analog bus. For use with DI-8B Modules. View the 8BP16 schematic or the 8BPxx schematic or download the pdf.
Description
The 8BPWR-2 encapsulated power supply has a wide ranging 7-34VDC input voltage range and provides 5VDC output suitable for all 8B modules. It is designed to mount on the 8B backpanels. The compact size and low weight are ideal for high-density applications. Learn more (pdf).
Description
16-channel backplane for 5B modules. Each module has its own analog bus. For use with DI-5B Modules.
Description
Base element with snap foot required for use with models DI-5B03 and DI-5B04 Backplanes. For use with DI-5B Modules.
Description
DI-5B amplifiers offer the convenience to mix and match modules based upon measurement function and range to meet any application requirement, from the most simple to the most complex.
Description
5V DC Power Supply for use with both DI-5B and DI-8B Backplanes.
Description
Side element required for use with models DI-5B03 and DI-5B04 Backplanes. For use with DI-5B Modules and Backplanes.
Description
Carrying Case. Interior padding and rugged exterior for safe transportation of your GL220 or GL820 data logger.
Description
Carrying Case. Interior padding and rugged exterior for safe transportation of your GL220 data logger. 4-6 WEEK LEAD TIME.
Description
Carrying Case. Interior padding and rugged exterior for safe transportation of your GL240 data logger.
Description
Carrying Case. Interior padding and rugged exterior for safe transportation of your GL820 data logger.
Description
Carrying Case. Interior padding and rugged exterior for safe transportation of your GL840 data logger.
Description
Portable desktop enclosure with handle for portability.
Description
Carrying Case. Interior padding and rugged exterior for safe transportation of your data logger.
Description
Sync cable used to daisy-chain two GL7000 for synchronous operation.
Description
20-channel standard input terminal for GL840 data loggers. Please note: Use of one or more B-564 input terminals with the GL840-WV forces all channels to the low common mode voltage spec of 60V. Use model B-565 to maintain the 300V spec across all channels.
Description
20-channel high CMV input terminal
Description
Extension terminal base for GL840 and GL860 data loggers. Includes base unit, connection plate, and screws.
Description
50 cm extension terminal cable for GL840 data loggers.
Description
2 m extension terminal cable for GL840 data loggers.
Description
Wireless communication option for GL240 and GL840 data loggers. 802.11/b/g/n. Required for use with GL100-WL Data Logger with a GL240. Attachment of this wireless option to the instrument prevents the use of an external SD memory card, with only the internal 4 GB non-volatile memory available for data storage.
Description
Two (2) 7.2V/2900mAh lithium battery packs. Only one B-569-2 is required to power the GL900. Please Note: Continental U.S. shipping ONLY.
Description
One (1) 7.2V/2900mAh lithium battery pack. Please Note: Continental U.S. shipping ONLY.
Description
DIN Rail Mounting Adapter for GL260 and GL860 models.
Description
NIST-traceable calibration certificate for all Graphtec GL Data Loggers. Does not include data. This item is NOT included with a new unit and should be purchased at the same time as the new unit. Shipping charges will apply if not ordered at time of logger purchase. Learn more about Calibrating your device.
Description
NIST-traceable calibration certificate for all Graphtec GL Data Loggers. Includes data. This item is NOT included with a new unit and should be purchased at the same time as the new unit. Shipping charges will apply if not ordered at time of logger purchase. Learn more about Calibrating your device.
GL100-WL
Wireless Coupler
Discontinued by manufacturer
Description
Wireless coupler for GL240 and GL840 Data Loggers. Connect GS series sensors to expand the measurement capability of your data logger. Learn More.
Description
Thermistor Temperature sensor connects to model GS-4TSR. Measures -40 to 105 °C.
Description
Thermistor Temperature sensor connects to model GS-4TSR. Ultra thin. Measures -40 to 120 °C.
Description
Acceleration/Temperature sensor for GL100 Data Loggers. Measures up to 10G and -10 to 50 °C. May be directly connected to the GL840 Data Logger.
Description
Voltage and Temperature sensor for GL100 Data Loggers. Programmable per channel. Supports K and J type thermocouples (K: -200 to 1370 °C; T: -200 to 400 °C). Measures 20, 50, 100, 200, 500 mV; 1, 2, 5, 10, 20, 50 V; 1-5 V (for 4-20 mA using 250 Ω shunt). May be directly connected to the GL840 Data Logger.
Description
Clamp-on AC Current sensor for GS-DPA-AC. 100 A AC current.
Description
Clamp-on AC Current sensor for GS-DPA-AC. 200 A AC current.
Description
Clamp-on AC Current sensor for GS-DPA-AC. 50 A AC current.
Description
Carbon dioxide (CO2) sensor for GL100 Data Loggers. Measures 0 to 9,999 ppm. May be directly connected to the GL840 Data Logger.
GS-DPA-AC
Current Sensor
Obsolete
Description
AC Current sensor for model GL100-WL data loggers. Three sensors available: GS-AC50A: 50 A AC current sensor; GS-AC100A: 100 A AC current sensor; GS-AC200A: 200 A AC current sensor. May be directly connected to the GL840 Data Logger.
Description
Dual Port Adapter for GL100 or GL840 Data Loggers. Support dual connection with GS-TH, GS-LXUV, and GS-CO2 (other sensors are not supported).
Description
1.5 meter extension cable for use between GL100-WL or GL840 data loggers and GS sensors.
GS-LXUV
Illuminence/Ultraviolet sensor
$225.00This item is Obsolete and no longer available.
Description
Illuminence/Ultraviolet sensor for GL100 Data Loggers. Measures 0 to 200k lx and 0 to 30 mW /cm2. May be directly connected to the GL840 Data Logger.
Description
Connects to one of four inputs on the GL7-L/P amplifier module on one end, and the other end accommodates one of either RIC-08 alligator-clip or RIC-09 IC clip adaptor cables.
Description
Alligator-clip adapter cable. Requires one (1) RIC-07.
Description
Probe set for GL7-L/P consisting of (1) RIC-7 for connecting to any one of four GL7-L/P inputs; (1) RIC-08 alligator-clip adaptor cable; and (1) RIC-09 IC clip adaptor cable.
Description
Isolated, 6-ft BNC to protected banana jack cable (600 V max).
Description
Banana-to-alligator adapter for RIC-143 (one pair red/black).
Description
Banana to clip test plunger adapter for RIC-143 (one pair red/black).
Description
Spare US Adapter for AC power supply 101017-2 and 101085.
Description
Spare European Adapter for AC power supply 101017-2 and 101085.
Description
Spare UK Adapter for AC power supply 101017-2 and 101085.
Description
Spare Australian Adapter for AC power supply 101017-2 and 101085.
Description
Optional AC power supply (USB to AC) for stand-alone applications and charging EL-WiFi Series products. Includes US adapter.
Description
AC Power Adapter for EL- Data Loggers. Includes 4 interchangeable plug styles (UK, US, EU and AU/NZ). 1 meter cable length.
Description
White plastic wall bracket attaches to the back of your EL-MOTE device. Attach your EL-MOTE device to the wall using the affixed sticky pad or by screwing into the wall via the screw holes in the wall bracket (screws not provided).
Description
Short (15mm) thermistor probe for EL-MOTE-T data loggers. Accuracy: ±0.5°C (±1°F); Resolution: 0.1°C (0.1°F).
Description
Short (15mm) thermistor probe for EL-MOTE-T+ data loggers. Accuracy: ±0.15°C (±0.3°F); Resolution: 0.01°C (0.01°F).
Description
75mm thermistor probe (3 meter cable) thermistor probe for EL-MOTE data loggers. Accuracy: ±0.8°C (±1.5°F); Resolution: 0.1°C (0.1°F).
Description
High Accuracy 75mm thermistor probe (3 meter cable) for EL-MOTE data loggers. Accuracy: ±0.2°C (±0.4°F); Resolution: 0.01°C (0.01°F).
Description
2 meter Temperature and Humidity probe for EL-MOTE data loggers. Temperature Accuracy: ±0.3 (+5 to +60ºC) ±0.6 (+41 to +140ºF); Temperature Resolution: 0.1°C (0.1°F); Humidity Accuracy: ±2%RH (20 to 80%RH).
Description
High Accuracy 2 meter Temperature and Humidity probe for EL-MOTE data loggers. Temperature Accuracy: ±0.2°C (±0.4°F); Temperature Resolution: 0.01°C (0.01°F); Humidity Accuracy: ±1.8%RH.
Description
External Temperature Probe in Glycol Bottle for Vaccine Monitoring.
BAT 3V6 PRO
3.6V Battery
$18.49
Description
Replacement 3.6V battery, for EL-USB-1-PRO data logger. Please Note: Continental U.S. shipping ONLY.
BAT 3V6
3.6V Battery
$5.99
Description
Replacement 3.6V, 1200mAh lithium battery. Two (2) required for use with this data logger. Please Note: Continental U.S. shipping ONLY.
